quadient IX-7 - 3.2 Choosing Imprint Type

Choosing Imprint Type3.2
Type of Process and Type of Imprint
The table below indicates the 'Type of imprint' to choose, depending on the type of
process you want to apply to each set of mail.
The column on the right indicates, for each Type of imprint, the options available for
each type of Imprint.
If you do not set any parameter, the Mailing System uses default values.
Available Imprint optionsType of ImprintType of process
• Rate
• Weight
• Date
• ERA (optional)
• Slogan (optional)
• Print offset (optional)
• Sealing (optional)
[Normal]
(Printing Normal
Mail on page 42)
Applying postage to outgoing
mail
• Amount
• Date (optional)
[Payment Surcharge
Entry]
(Printing [Payment
Surcharge Entry]
Mail on page 66)
Enter the postage amount
manually
• Pre-paid imprint
• Slogan (optional)
• ERA Slogan (optional)
• Print offset (optional)
• Sealing (optional)
[PPI]
(Printing [PPI] Mail
on page 59)
Sending Prepaid mail:
• Date received (ON or OFF)
• Slogan 'Received' (ON or
OFF)
• Slogan (optional)
• Print Counter (optional)
• Print offset (optional)
[Received]
(Printing Incoming
Mail with [Received]
Mode on page 54)
Printing 'Received' or the date
on incoming mail:
• Turn sealer on[Pass Through]
(Running [Pass
Through] Mail on
page 56)
Sealing only:
(using optional feeder with
sealer)
37
| Page 37 | | Jun-22-2021 11:01 |
3
Processing Mail