2.
The default mail class is displayed. Press . The system motors start running.
You remove the mail piece from the scale and run the mail piece through the
mailing system.
The display shows "Printing in progress".
How to Enter the Weight Manually
Entering Weight Manually
You can enter the weight manually if a mail piece exceeds the weighing capacity of
all your weighing platform.
If this situation occurs, you will need to print the postage amount on a label to stick
onto the mail piece.
To enter the weight manually from the home screen, you must first select the postal
class:
1. Select the postal rate.
To select a rate, see How to Select a Rate on page 193.
78
| Page 78 | Jun-22-2021 11:01 |
3
Processing Mail
To Next Page
Loading...
