2. Insert the envelope into the mail path against the rear-guide wall, side to be printed
facing upwards.
If mail piece is bigger than mail path maximum thickness (see Mail Specifications
on page 367), press before you press to print a label. The label is printed
at once.
The Mailing System applies postage and the mail piece (or label) is sent to the
catch tray.
Otherwise, if you want to print several identical labels:
1.
Press and enter the number of labels.
Make sure the labels are available in the label dispenser (see Filling the Label
Dispenser on page 101).
2.
Press to print the labels.
When using sealer, collect the mail piece stack in the catch tray
and put stack aside to let envelopes dry.
3
Processing Mail
65
| Page 65 | Jun-22-2021 11:01 |
To Next Page
Loading...
