R&S ZNA67 - Page 1190

Command reference
R&S
®
ZNA
1190User Manual 1178.6462.02 ─ 20
Manual operation: See "Add / Add All... / Replace / Apply / Apply to All"
on page 584
MMEMory:LOAD:CORRection:RESolve <Channel>[, <CalGroupFile>]
Resolves the pool link between channel <Channel> and a correction data set (cal
group file). After resolving the pool link, the analyzer keeps the previous system error
correction as a channel calibration ("Channel Cal"). A new calibration will replace the
channel calibration but not overwrite the old cal group file (and not affect other chan-
nels).
Setting parameters:
<Channel> Channel number of an existing channel. ALL resolves the pool
link for all channels.
<CalGroupFile> Optional string parameter to specify the name of the cal group
file. Cal group files must have the extension *.cal. The direc-
tory must not be specified; the analyzer always uses the default
path C:\Users\Public\Documents\Rohde-Schwarz\ZNA
\Calibration\Data. If there is no link between <Ch> and the
specified file, the command has no effect. If no file is specified,
the command resolves any link between <Ch> and an arbitrary
cal group file.
Example: See MMEMory:LOAD:CORRection
Usage: Setting only
Manual operation: See "Resolve Pool Link / Remove Pool Link" on page 585
MMEMory:LOAD:CORRection:SLEVeling<PhyPt> <File>
Loads a leveling dataset for port <PhyPt> from the specified *.lev file (R&S ZNA-pro-
prietary, binary file format).
*.lev files can be created using MMEMory:STORe:CORRection:
SLEVeling<PhyPt>.
Suffix:
<PhyPt>
.
Physical port number
Setting parameters:
<File> String parameter containing the path and file name of the *.lev
file. If the path is omitted, the current directory is used (see
MMEMory:CDIRectory).
Usage: Setting only
Options: R&S ZNA-K8
Manual operation: See "Load/Save" on page 834
SCPI command reference