R&S ZNA67 - Page 1207

Command reference
R&S
®
ZNA
1207User Manual 1178.6462.02 ─ 20
Manual operation: See "Add / Add All... / Replace / Apply / Apply to All"
on page 584
MMEMory:STORe:CORRection:SLEVeling<PhyPt> <File>
Persists the current leveling dataset of port <PhyPt> to the specified *.lev file
(R&S ZNA-proprietary, binary file format).
The dataset can be recalled using MMEMory:LOAD:CORRection:
SLEVeling<PhyPt>.
Suffix:
<PhyPt>
.
Physical port number
Setting parameters:
<File> String parameter containing the path and file name of the *.lev
file. If the path is omitted, the current directory is used (see
MMEMory:CDIRectory).
Usage: Setting only
Options: R&S ZNA-K8
Manual operation: See "Load/Save" on page 834
MMEMory:STORe:CORRection:TCOefficient<Ch> <PmclFile>
Saves the power meter (two-port) transmission coefficients of channel <Ch> to a
power meter correction list file.
Suffix:
<Ch>
.
Channel number
Setting parameters:
<PmclFile> String parameter specifying the name and directory of the cre-
ated power meter correction list file. The file extension *.pmcl
is mandatory.
If no path is specified, the analyzer searches the current direc-
tory, to be queried with MMEMory:CDIRectory
*RST: n/a
Example: See SOURce<Ch>:POWer<PhyPt>:CORRection:
TCOefficient:CALibration
Usage: Setting only
Manual operation: See "Recall... / Save..." on page 579
MMEMory:STORe:EYE:MASK <TraceName>, <TraceFile>
Stores a user-defined eye mask to a 7bit ASCII file.
Setting parameters:
<TraceName> Name of the related eye diagram
SCPI command reference