R&S ZNA67 - Page 1215

Command reference
R&S
®
ZNA
1215User Manual 1178.6462.02 ─ 20
MMEMory:STORe:TRACe:OPTion:DECimals:STIMulus <NumDecimals>
MMEMory:STORe:TRACe:OPTion:DECimals:DATA <NumDecimals>
Defines the number of decimal places for stimulus and data values in all supported
trace data files (Touchstone, ASCII, MatLab)
Note that in the current implementation of the Touchstone file export, only the L11 file
format supports independent settings for stimulus and data values (see MMEMory:
STORe:TRACe:OPTion:FORMat). For the F11 and F20 formats, the DATA number of
digits is used for both stimulus and data values.
Parameters:
<NumDecimals> Range: 1 to 15
Manual operation: See "Decimal Places" on page 425
MMEMory:STORe:TRACe:OPTion:FORMat <TS_Frmt>
Selects the file format to be generated during Touchstone export.
Parameters:
<TS_Frmt> F11 | F20 | L11
F11
Trace output according to Touchstone standard 1.1 (new library)
F20
Trace output according to Touchstone standard 2.0 (new library)
L11
Legacy Touchstone 1.1 output
F11 and L11 slightly differ w.r.t. casing, number formatting and
comments. F20 adds keywords etc. introduced with Touchstone
standard version 2.0.
Manual operation: See "File Format" on page 424
MMEMory:STORe:TRACe:OPTion:PLUS <arg0>
This command defines how positive numbers are prefixed during Touchstone file
export: by a leading space, a plus sign or not at all.
Parameters:
<arg0> SPACe | PLUS | VOID
Manual operation: See "Positive Number Prefix" on page 797
MMEMory:STORe:TRACe:OPTion:SSEParator <Boolean>
This command defines whitespace insertion during Touchstone file export.
If set to ON, separator lines are skipped, i.e. the content parts are no longer separated
by blank lines.
SCPI command reference