GUI reference
R&S
®
ZNA
519User Manual 1178.6462.02 ─ 20
For complex calibrations, the wizard proceeds in several steps ("Next"/"Back" buttons
at the bottom of the dock widget). On "Apply", the R&S ZNA calculates the system
error corrections and/or power corrections from the acquired data and applies the
result to the related channels.
The "Reduced Through" logic and the powerful "Calibrate All" function help you to keep
the number of calibration sweeps and the number of calibration standard/unit recon-
nections as small as possible (see Chapter 4.5.1.11, "Full n-Port calibration with
reduced number of Through connections", on page 170).
Cal softtool
To Next Page
Loading...
