R&S ZNA67 - Page 588

GUI reference
R&S
®
ZNA
588User Manual 1178.6462.02 ─ 20
Save Measurement
Allows you to save the current measurement results to the temporary METAS VNA
Tools project that is created under the hood during the METAS calibration. This project
can be saved using the Export Data to METAS VNA Tools function.
Opens the "Measurement Filename" dialog that lets you specify a prefix for the name
of the generated file. A timestamp of the related measurement is always appended.
If no measurement data are available, the firmware displays a message box instead of
the "Measurement Filename" dialog:
Export Data to METAS VNA Tools
Saves the current state of the METAS VNA Tools project that is created with the
METAS calibration.
The exported ZIP file also contains the characterizations of the standards that were
used for calibration and verification. The characterization data are kept as static
resources in the METAS VNA Tools database. In summary, the exported ZIP file
includes everything that is required to perform an offline analysis using any METAS
VNA Tools installation, not only the one on the VNA.
Cal softtool