GUI reference
R&S
®
ZNA
750User Manual 1178.6462.02 ─ 20
This dialog is available with Extended time domain analysis option R&S ZNA-K20 only.
Measurement / Topolgy
see "Measurement / Topology" on page 740
DC Value
see "DC Value" on page 407
Mode
Allows you to switch temporarily between the real DUT (with measured frequency
response) and an ideal one (with flat frequency response).
Remote command:
CALCulate<Chn>:EYE:DUT:MODE
Equalization
The "Define Equalization" dialog allows you to activate and define a continuous time
linear equalization at the receive side for the simulated eye diagram measurement.
Access: "Equalize" button in the Advanced Settings dialog
Applic softtool
To Next Page
Loading...
