GUI reference
R&S
®
ZNA
808User Manual 1178.6462.02 ─ 20
Selftest Tab
Allows to run an automatic selftest on the analyzer, and to displays its results. Check
"Show Details" to see the detailed test results.
Error Log Tab
Contains a chronological record of errors that occurred in the current and in previous
sessions (see Chapter 9.1, "Errors during firmware operation", on page 1632).
The "Error" tab comes with an additional button for clearing the log ("Delete Error
Log").
Cal Validation Tab
Displays the result of the last cal validation. See "Cal Validation ..." on page 518.
Setup softtool
To Next Page
Loading...
