5-16 hsb
2
PLUS Series LCD Display
Using the ST60 or
ST80 Navigator
Keypad
Most of the alphanumeric keys are used to input multiple characters. Each
timeyoupressoneofthesekeysinsuccession,thenextcharacteronthatkeyis
input.For example, each press of the 1 keyalternately inputs A, B, C, then 1.
A short beep is emitted each time a key is pressed.
The Navigator’s arrow keys function much like the radar/chart display’s
trackpad,enablingyou tomove the cursorpositionorinputalpha,numeric,or
specialcharacters(.,-/‘&).
The ins key functions the same as the ENTER key on radar/chartdisplayand
del inserts a space during edit mode.
Selecting an Entry in the Waypoint List
3. The Navigator can be used to select an existing item in the WaypointList.
This can be accomplishedusing the arrow or alphanumeric keys.
➤ To selectan existingitem in the Waypoint List:
1. Usetheupanddownarrowkeystomove theselectionbarupanddown the
list to highlight the desired entry.
or
Press the alphanumeric key that containsthe first letter or number ofthe
desiredwaypointname. The selection bar movesto the entry starting with
that letter or number.
If more than one entry begins with that character, the selectionbar moves
to the first one in the list. Each time the same key is pressed, the selection
bar moves to the entry startingwith the next characteron the key. If no
entryexistsfor that character, the entry starting withthe nearestprevious
character isselected.If the numeric value of the key is input when no
numericentry exists, the selectionbar moves to the first alpha entry.
For example,let’s saywe have four waypoints named ORION,
POLARIS, QUANTUM, and 6-GUN. Pressingthe opq/6 key four suc-
cessivetimes would select the waypointsORION (O), POLARIS (P),
QUANTUM (Q), then 6-GUN (6). However, pressing the rst/7 key four
successive times would select QUANTUM forthe first three key presses
becauseentriesbeginningwith the associated letters do not exist and Q is
thenextpreviousbeginningletter.The fourth press ofthe rst/7 key would
select6-GUN because no entriesbegin with a 7 and 6 is the next previous
beginningnumber.
2. Use the ins key like the display’s ENTER key, to close the Waypoint List.
The del key and left and right arrow keys do not function in select mode.
81186_3.book Page 16 Thursday, August 22, 2002 8:23 AM
To Next Page
Loading...
