1,000-SHEET FINISHER INSTALLATION
A265/A267 3-36 SM
2. Install screw [A] loosely.
3. Hang the front stand [B] on the screw which was installed in step 2.
4. Secure the front stand (3 screws, including screws [A]).
5. Install the rear stand [C] (2 screws).
6. Pull out the stapler unit [D].
7. Draw out the locking lever [E] (1 screw).
8. Align the finisher on the stands, and lock it in place by pushing the locking lever.
9. Secure the locking lever (1 screw) and push the stapler unit into the finisher.
A681I101.WMF
A681I502.WMF
[A]
[B]
[C]
[D]
[E]
To Next Page
Loading...
