Ricoh Aficio 270 - Page 194

SERVICE PROGRAM MODE
A265/A267 4-8 SM
Mode No.
Class
1 and 2
Class
3
Function Settings
If a middle size threshold is not stored with
SP1-908-9, this SP adjusts the upper paper
lift motor reverse time for paper sizes larger
than the small size threshold set with
SP1-908-8.
If a middle size threshold is stored with SP1-
908-9, then this SP adjusts the motor
reverse time for sizes larger than the middle
size.
Do not input a value greater than 1200.
1
1st Bottom Plate
Pressure Adjustment
(Normal Size)
Use this SP when a paper feed problem
occurs from the 1st paper tray.
See “Paper Lift Mechanism” for details on
SP1-908, Section 2.8.4.
0 ~ 2000
1 ms/step
200 ms
Adjusts the upper paper lift motor reverse
time for paper of the same size as or smaller
than the small size threshold set with SP1-
908-8.
Do not input a value greater than 1200.
2
1st Bottom Plate
Pressure Adjustment
(Small Size)
Use this SP when a paper feed problem
occurs from the 1st paper tray.
See “Paper Lift Mechanism” for details on
SP1-908, Section 2.8.4.
0 ~ 2000
1 ms/step
600 ms
Adjusts the upper paper lift motor reverse
time for paper sizes larger than the small
size threshold set with SP1-908-8, up to and
including the middle size threshold set with
SP1-908-9. If a middle size threshold is not
stored with SP1-908-9, this SP is not used.
Do not input a value greater than 1200.
3
1st Bottom Plate
Pressure Adjustment
(Middle Size)
Use this SP when a paper feed problem
occurs from the 1st paper tray.
See “Paper Lift Mechanism” for details on
SP1-908, Section 2.8.4.
0 ~ 2000
1 ms/step
200 ms
Adjusts the upper paper lift motor forward
rotation time for paper of the same size as
or smaller than the small size threshold set
with SP1-908-8. The motor rotates forward
when the remaining paper amount is lower
than the value of SP1-908-6.
1-908*
4
1st Bottom Plate
Pressure
Re-adjustment
(Small Size)
Use this SP when a paper feed problem
occurs when paper in the 1st paper tray is
running low.
See “Paper Lift Mechanism” for details on
SP1-908, Section 2.8.4.
0 ~ 2000
1 ms/step
400 ms