Ricoh Aficio 270 - Page 211

SERVICE PROGRAM MODE
SM 4-25 A265/A267
Service
Tables
Mode No.
Class
1 and 2
Class
3
Function Settings
Adjusts the erase margin at each side for
scanning.
1
Erase Margin
(Leading Edge)
0 ~ 9.0
0.1 mm/step
1.0 mm
2
Erase Margin
(Trailing Edge)
0 ~ 9.0
0.1 mm/step
1.0 mm
3
Erase Margin
(Left Side)
0 ~ 9.0
0.1 mm/step
1.0 mm
4-012*
4
Erase Margin
(Right Side)
Do not adjust this unless the user wishes to
have a scanner margin that is greater than
the printer margin.
0 ~ 9.0
0.1 mm/step
1.0 mm
Performs a scanner free run with the
exposure lamp on.
4-013
Scanner Free Run
After selecting “1”, press “OK” or the
(
key
twice to start this feature. Press the
&
(Clear/Stop) key to stop.
0: No
1: Yes
Adjusts the scanning start position on the
white plate for auto shading.
1
White Plate
Scanning
(Start Position)
The default is 6 mm from the leading edge.
The setting specifies how far scanning starts
from the default position.
– 3.0 ~ + 6.0
0.1 mm/step
0.0 mm
Adjusts the width of the area on the white
plate (in the sub scan direction) that is
scanned for auto shading.
4-015*
2
White Plate
Scanning
(Scanning Area)
The default is 5 mm. The current setting
specifies the difference from this default.
– 3.0 ~ + 6.0
0.1 mm/step
0.0 mm
Adjusts the magnification in the sub scan
direction for scanning. If this value is
changed, the scanner motor speed is
changed.
4-101*
Sub Scan
Magnification
(Scanner)
Use the
!
key to toggle between + and -
before entering the value. The specification
is
±
0.5%. See “Replacement and
Adjustment - Copy Adjustment” for details
,
Section 6.8.
– 0.9 ~ + 0.9
0.1%/step
0.0%
Displays the status of the APS sensors and
platen/DF cover sensor.
4-301
APS Data Display
See “APS and Platen/ADF Cover Sensor
Output Display” after the SP mode table
,
Section 4.2.12.
Selects whether the copier determines that
the original is A5 size when the APS sensor
cannot detect the size.
4-303*
APS Small Size
Original
If “A5 lengthwise” is selected, paper sizes
that cannot be detected by the APS sensors
are regarded as A5 lengthwise. If “Not
detected” is selected, “Cannot detect
original size” will be displayed.
0: No
(Not
detected)
1: Yes
(A5
lengthwise)