BIT SWITCHES
A265/A267 4-24 SM
System Switch 0F
No FUNCTION COMMENTS
0
to
7
Country code for functional
settings (Hex)
00: France 11: USA
01: Germany 12: Asia
02: UK 13: Japan
03: Italy 14: Hong Kong
04: Austria 15: South Africa
05: Belgium 16: Australia
06: Denmark 17: NewZealand
07: Finland 18: Singapore
08: Ireland 19: Malaysia
09: Norway 1A: China
0A: Sweden 1B: Taiwan
0B: Switz. 20: Turkey
0C: Portugal 21: Greece
0D: Holland
0E: Spain
0F: Israel
This country code determines the factory settings
of bit switches and RAM addresses. However, it
has no effect on the NCU parameter settings and
communication parameter RAM addresses.
Cross reference
NCU country code: Function 06, parameter C.C.
System Switch 10
No FUNCTION COMMENTS
0
to
7
Threshold memory level for
parallel memory transmission
Threshold = N x 128 kbytes + 256 kbytes
N can be between 00 - FF(H)
Default setting: 02(H) = 512 kbytes
System Switch 11
No FUNCTION COMMENTS
0
TTI printing position
0: Superimposed on the page
data
1: Printed before the data
leading edge
Change this bit to 1 if the TTI overprints
information that the customer considers to be
important (G3 transmissions).
1 TSI (G3) or CIL/TID (G4)
printing position
0: Superimposed on the page
data
1: Printed before the data
leading edge
Change this bit to 1 if the TSI (G3) or CIL/TID
(G4) overprints information that the customer
considers to be important.
G4: Europe model only
2
Not used Do not change the factory settings.
3
TTI used for broadcasting
0: The TTIs selected for each
Quick/Speed dial are used
1: The same TTI is used for
all destinations
1: The TTI (TTI_1 or TTI_2) which is selected with
user switch 01 bit 6 is used for all destinations
during broadcasting.
To Next Page
Loading...
