BIT SWITCHES
A265/A267 4-26 SM
System Switch 16
No FUNCTION COMMENTS
0
Parallel Broadcasting
0: Disabled
1: Enabled
1: When the G4 or/and G3 unit is installed, the
machine sends messages simultaneously using
both available ports (PSTN/ISDN) during
broadcasting.
1
Changing the G3 line default.
0: PSTN-1
1: PSTN-2
This function allows the user to select the default
G3 line type. An optional SG3 unit is required to
use the PSTN-2 setting.
1-7
Not used Do not change the settings.
System Switch 17 - Not used (do not change the settings)
System Switch 18 - Not used (do not change the settings)
System Switch 19
No FUNCTION COMMENTS
0
to
2
Key acknowledgement tone
volume adjustment
000 (Min.: OFF)-111 (Max.)
Default setting – 011
This controls the volume of this tone when the
machine is in fax mode (it has no effect on the tone
when the machine is in copier or printer mode).
3-6
Not used Do not change the settings.
7
Special Original mode
0: Disabled
1: Enabled
1: If the customer frequently wishes to transmit a
form or letterhead which has a colored or printed
background, change this bit to “1”. “Special
Original” can be selected in addition to the “Text”,
“Text/Photo” and “Photo” modes.
When this mode is selected, the “Text/Photo” and
“Photo” LEDs are both lit.
Cross reference
q
Type of special original mode – Scanner switch
00 bit 0.
System Switch 1A - Not used (do not change the settings)
System Switch 1B - Not used (do not change the settings)
To Next Page
Loading...
