BIT SWITCHES
SM 4-39 A265/A267
Service
Tables
A895
Printer Switch 06
No FUNCTION COMMENTS
0 Printing while a paper
cassette is pulled out, when
the Just Size Printing feature
is enabled.
0: Printing will not start
1: Printing will start if another
cassette has a suitable size of
paper, based on the paper
size selection priority tables.
Refer to Just Size Printing in section 2 for details.
Cross reference
Just size printing on/off – User switch 05, bit 5
1-7
Not used. Do not change the settings.
Printer Switch 07
No FUNCTION COMMENTS
0
Reduction for Journal printing
0: Off
1: On
1: The Journal is reduced to 91% to ensure that
there is enough space in the left margin for punch
holes or staples.
2-3
Not used. Do not change the settings.
4
List of destinations in the
Communication Failure
Report for broadcasting
0: All destinations
1: Only destinations where
communication failure
occurred
1: Only destinations where communication failure
occurred are printed on the Communication
Failure Report.
5-7
Not used. Do not change the settings.
Printer Switch 08 - Not used (do not change the settings)
Printer Switch 09 - Not used (do not change the settings)
Printer Switch 0A - Not used (do not change the settings)
Printer Switch 0B - Not used (do not change the settings)
Printer Switch 0C - Not used (do not change the settings)
Printer Switch 0D - Not used (do not change the settings)
Printer Switch 0E
No FUNCTION COMMENTS
0 Paper size selection priority
0: Width
1: Length
0: A paper size that has the same width as the
received data is selected first.
1: A paper size which has enough length to print all
the received lines without reduction is selected first.
1
Paper size selected for
printing A4 width fax data
0: 8.5" x 11" size
1: A4 size
This switch determines which paper size is
selected for printing A4 width fax data, when the
machine has both A4 and 8.5" x 11" size paper.
To Next Page
Loading...
