ISDN Unit
A895
INSTALLATION PROCEDURE
SM 1-3 A265/A267
6. Replace the rear cover and the small cover.
7. Connect the cable to the ISDN jack, then plug in the machine and turn the main
switch on.
8. Enter SP mode as follows:
1) Press the “Clear Modes” key.
2) Enter “107”
3) Press the “Clear/Stop” key more than 3 seconds.
"
→
#
→
$
→
%
→
&
9. Enter “2” (select “Fax”).
10. Enter “01” (select “Bit Switches”).
11. Enter “4” (select “Communication Switch”).
12. Press the “
↑
Switch” key several time and select “Switch 16”.
13. Press “2” to change bit 2 from 0 to 1.
14. Exit SP mode and turn the main switch off/on.
To Next Page
Loading...
