Ricoh Aficio 270 - Page 788

PRINTER CONTROLLER
A265/A267 3-2 SM
If the optional fax unit has not been installed, do steps 4 to 6.
4. Install the stand [A] (2 screws).
5. Connect the cable [B] to the expansion box [C] and install the box (7 screws).
6. Install the grounding bracket [D] (1 screw). Go to step 8.
If the optional fax has been installed, do steps 7 to 9.
7. Remove the optional fax unit [E] (6 screws and 2 connectors).
8. Install the expansion box [F] (refer to steps 5 and 6).
9. Re-install the optional fax unit on the expansion box (6 screws, 2 connectors).
B306I507.WMF
B306I508.WMF
B306I505.WMF
[A]
[B]
[C]
[D]
[E]
[F]