Printer
Controller
B306
INSTALLATION PROCEDURES
SM 3-3 A265/A267
10. Remove the cover [A] (3 screws) from the application cover [B].
11. Reinstall the removed covers (rear cover and application cover).
12. Remove the mode key cap. Then install the key tops [C] and decal [D]
depending on the machine configuration, as shown.
13.
European and Asian models only:
Remove the cover [E], then install the
operation switch cover [F].
B306I504.WMF
B306I503.WMF
B306I510.WMF
[A]
[B]
[C]
[D]
[E]
[F]
To Next Page
Loading...
