6. Press the [ ] or [ ] key to select [Encryption Method], and then press the [OK] key.
7. Press the [ ] or [ ] key to select encryption method, and then press the [OK] key.
Consult your network administrator for information about making encryption settings.
Encryption settings are as follows:
•
[TKIP]
Uses the same algorithm as RC4, but further reduces vulnerability using methods such as key
mixing.
• [CCMP(AES)]
Increases security using AES (Advanced Encryption Standard).
The display returns to the [WPA] menu.
8. Press the [
] or [ ] key to select [Authentication Method], and then press the [OK] key.
9. Press the [ ] or [ ] key to select authentication settings, and then press the [OK] key.
Authentication settings are as follows:
• [WPA-PSK]
Performs authentication using an encryption key (a Pre-Shared Key) that is shared by the access
point and client.
• [WPA]
5. Configuration
92
To Next Page
Loading...
Need help?
General