• For details about how to configure the settings using Web Image Monitor, see p.139 "Using Web
Image Monitor" and Web Image Monitor Help.
Changing the Host Interface Menu
Follow the procedure below to change the I/O Timeout setting.
1. Press the [Menu] key.
2. Press the [ ] or [ ] key to select [Host Interface], and then press the [OK] key.
3. Press the [ ] or [ ] key to select [I/O Timeout], and then press the [OK] key.
4. Press
the [
] or [ ] key to select the lead time needed to end a printing operation, and then
press the [OK] key.
5. Press the [Menu] key.
4. Making Printer Settings Using the Control Panel
134
To Next Page
Loading...
