• If the option you want to select is not displayed, PPD files may not be set up correctly. To complete
the setup, check the name of the PPD file displayed in the window.
Using USB Interface
Follow the procedure below to setup USB connection.
• USB2.0 can be used only with Mac OS X 10.3.3 or higher.
1. Check that the power of the printer is off.
2. Connect the printer to your computer with a USB cable.
Connect the USB cable firmly.
3. Turn on the power of the printer.
4. Start Printer Setup Utility or Print Center utility.
Under Mac OS X 10.5 or 10.6, start System Preferences and click [Print & Fax].
5. Click [Add] or [ ].
Mac OS X 10.5 or 10.6
Click [Default].
Mac OS X 10.4
Click a printer that has "USB" indicated in the "Connection" column.
Mac OS X 10.3 or lower
Click [USB] on the pop-up menu.
The connected printer appears.
6. Select the printer, and then select its brand name from the [Printer Model:] pop-up menu.
Mac OS X 10.5 or 10.6
Select the printer you are using from the [Printer Name] list, and [kind] of USB.
Mac OS X 10.4
Select the printer you are using from the [Print Using] pop-up menu.
A list of printer types appears.
7. Select the connected printer from the list of printer models, and then click [Add].
8. Quit Printer Setup Utility, Print Center utility or System Preferences.
Installing the Printer
45
To Next Page
Loading...
Need help?
General