Auto E-mail Notify
Specify whether or not to send an error message to a preset e-mail address when an error occurs in
the printer. After changing the setting, turn off the power of the printer briefly, and then turn it on again.
For information, see Web Image Monitor Help.
Default: [On]
• On
• Off
Changing the System Menu
Follow the procedure below to change the settings for Auto Off Timer.
1. Press the [Menu] key.
2. Press the [ ] or [ ] key to select [System], and then press the [OK] key.
3. Press the [ ] or [ ] key to select [Auto Off], and then press the [OK] key.
4. Press the [ ] or [ ] key to select [Auto Off Timer], and then enter the [OK] key.
5. Press the [ ] or [ ] key to select the lead time needed to switch to auto off mode.
6. Press the [OK] key.
7. Press the [Menu] key.
4. Making Printer Settings Using the Control Panel
110
To Next Page
Loading...
Need help?
General