Using as the Windows Network Printer
This describes how to install the PCL or PostScript 3 printer driver when using the printer as the Windows
network printer.
To use the print server, install the printer driver by selecting "Network printer server", and then select the
Windows shared printer.
This section assumes that the client has already been configured to communicate with a Windows print
server. Do not begin the following procedure before the client is set up and configured correctly.
• Manage Printers permission is required to install the drivers. Log on as an Administrators group
member.
Installing the PCL printer driver
1. Close all applications except this manual.
2. Insert the CD-ROM into the CD-ROM drive.
The installer starts.
Auto
Run may not work with certain operating system settings. If this happens, launch "Setup.exe" on
the CD-ROM root directory.
If the [User Account Control] window appears, click [Continue] or [Yes].
3. Select an interface language, and then click [OK].
The default interface language is English.
4. Click [PCL Printer Drivers].
The software license agreement appears in the [License Agreement] window.
5. After reading the agreement, select the [I accept the agreement.] check box, and then click
[Next].
6. In the [Select Program] window, select the check box of the printer driver you want to use.
You can select several printer drivers.
The PCL 6 printer driver is installed in the language specified by your operating system.
7. Click [Next].
8. Select the check box of the printer model you want to use.
The printer name can be changed in the Change settings for 'Printer Name' box.
9. Double-click the printer name to display the printer settings.
The details shown in [Comment], [Driver], and [Port] vary depending on the operating system, printer
model, and port.
2. Network Connection
28
To Next Page
Loading...
Need help?
General