Ricoh Aficio SP 5200DN

8. Adjusting the Printer
This chapter explains how to adjust the image density and print position.
Adjusting the Image Density
• Maximized settings may produce smudged printouts.
• Image Density settings should be made from the application or the printer driver whenever possible.
1. Press the [Menu] key.
CEC216
2. Press the [ ] or [ ] key to select [Maintenance], and then press the [OK] key.
3. Press the [ ] or [ ] key to select [Quality Maintenance], and then press the [OK] key.
4. Press
the [
] or [ ] key to select [Image Density Adjustment], and then press the [OK] key.
163
8