Paper Misfeed Message (Z1)(Z2)
The
"
(Z1)(Z2) Opn R.Cov/Tray1 & remove ppr. Opn & cls F.Cov" error message appears when a paper
misfeed occurs inside the duplex section.
• Forcefully removing misfed paper may cause paper to tear and leave scraps of paper in the printer.
This might cause a misfeed and damage the printer.
•
If paper is fed from the bypass tray, be sure to remove all the paper from the bypass tray and close
it before opening the front cover.
1. Open the rear cover.
To Next Page
Loading...
