URL configuration
You can set URLs linked by clicking URL on Web Image Monitor.
Specify "1" or "2" for x as the number corresponding to the URL. Up to two URLs can be registered
and specified.
msh> web url http://"The URL or IP address you want to register"/
Deleting URLs registered as link destinations
msh> web x clear url
Specify "1" or "2" for x as the corresponding number to the URL.
Link name configuration
You can enter the name for URL that appears on Web Image Monitor.
Specify "1" or "2" for x as the corresponding number to the link name.
msh> web name "Name you want to display"
Resetting URL names registered as link destinations
msh> web x clear name
Specify "1" or "2" for x as the number corresponding to the link name.
Help URL configuration
You can set URLs linked by clicking [Help] or [?] on Web Image Monitor.
msh> web help http://"Help URL or IP address"/help/
Deleting Help URL
msh> web clear help
wiconfig
Use the "wiconfig" command to make settings for Wireless LAN.
View settings
msh> wiconfig
View Wireless LAN information
msh> wiconfig cardinfo
• If Wireless LAN is disabled or unavailable, information about it will not appear.
Configuration
msh> wiconfig "parameter"
2. Remote Maintenance Using telnet
72
To Next Page
Loading...
