Duplex Printing
This option enables duplex printing.
• The duplex unit is required.
duplex=value of duplex printing
Duplex printing Value
enable on
disable off
The following sample shows how to set duplex printing (host name: nphost, file name: file1):
•
rsh
% rsh nphost print duplex=on,binding=longedge < file1
• rcp
% rcp file1 nphost:duplex=on,binding=longedge
• ftp
ftp> put file1 duplex=on,binding=longedge
• Before selecting duplex, the binding option must be set to on.
•
Data and paper volume affect the completion of the print job.
• For details about available paper size for duplex printing, see the manual that comes with this printer.
Binding
Select the binding direction for duplex printing.
• The duplex unit is required.
binding=value of binding
Binding direction Value
Longedge longedge
Shortedge shortedge
Specifying the Device Option
31
To Next Page
Loading...
