set
Use the "set" command to set the protocol information display "up" or "down".
View settings
The following command displays the protocol information (up/down).
msh> set ipv4
msh> set ipv6
msh> set ipsec
msh> set appletalk
msh> set netware
msh> set smb
msh> set protocol
• When protocol is specified, information about IPv4, IPv6, IPsec, AppleTalk, NetWare, and SMB
appears.
msh> set parallel
msh> set usb
msh> set lpr
msh> set lpr6
msh> set ftp
msh> set ftp6
msh> set rsh
msh> set rsh6
msh> set diprint
msh> set diprint6
msh> set web
msh> set snmp
msh> set ipp
msh> set ipp6
msh> set http
msh> set http6
msh> set bonjour
msh> set bonjour6
msh> set ssl
msh> set ssl6
Using telnet
61
To Next Page
Loading...
