Messages Description
RC Gate Connection Error Connection with the RC Gate failed.
Ready The printer is ready to print.
Replace Black PCU It is time to replace the black drum unit.
Replace Fusing Unit It is time to replace the fusing unit.
Replace Int. Transfer Unit It is time to replace the transfer unit.
Replace Maintenance Kit It is time to replace the maintenance kit.
Replace PCU (Color) It is time to replace the color drum unit.
Replace Print Cartridge It is time to replace the print cartridge.
Reset IPDS fonts The IPDS fonts are being reset.
SD Card Authentication failed SD card authentication failed.
Supplies Order Call failed The supply order call has failed.
Tray Error: Duplex Printing Selected paper tray cannot be used for duplex printing.
Warming Up... The printer is warming up.
W.T.Bttl.notDetected/L.Cvr.Open The left cover is open, or the waste toner bottle is not set.
• Check the error contents that may be printed in the configuration page. For details about printing a
configuration page, see "List/Test Print Menu", Software Guide.
Printer Configuration
You can check the printer configuration using telnet.
This section explains the checking procedure for input/output tray and printer language.
•
UNIX: Use the "info" parameter and the "rsh", "rcp", "ftp", and "sftp" commands.
• mshell: Use the "info" command.
Input Tray
Item Description
No. ID number of the paper tray
Getting Printer Information over the Network
83
To Next Page
Loading...
Need help?
General