4. Press the [ ] or [ ] key to select [Off], and then press the [OK] key.
5. Press the [Menu] key.
• The
machine administrator can enable the setting again thorough the log collection server. In addition,
the machine administrator can check or change the transfer log setting. For details about the transfer
log setting, see log collection server help.
• When this setting is enabled, the printer transfers log information to the log collection server. Using
this information, it becomes possible to identify unauthorized access.
• It is not possible to enable this setting from the printer’s control panel or Web Image Monitor.
• For details about log collection server, contact your local dealer.
Using Remote Communication Gate S to Manage Log Files
For details about using Remote Communication Gate S
to manage log files, see the manual supplied with
Remote Communication Gate S.
Using Web Image Monitor to Manage Log Files
This can be specified by the machine administrator.
You
can specify the types of log recording and collection level, perform log encryption, and delete all logs.
Specifying log collect settings
This can be specified by the machine administrator.
Specify collection log settings. The collection log levels are listed below.
Job Log Collect Level
Level 1
User Settings
Access Log Collect Level
Level 1
Level 2
User Settings
For details about logging in and out with administrator authentication, see p.22 "Using Web Image
Monitor to Configure Administrator Authentication".
1. Log in to Web Image Monitor as an administrator.
Managing Log Files
77
To Next Page
Loading...
Need help?
General