ipds
Use the "ipds" command to view and configure the ipds settings.
Viewing settings
The following command displays the current ipds settings:
msh> ipds
Changing ipds port number
msh> ipds port [1024-65535]
• The default is 5001.
• Cannot use the port number of the 2501, 2601, and 9100.
Setting timeout
msh> ipds timeout [30-65535]
• The timeout function is disabled by default.
ipsec
Use the "ipsec" command to view and configure the IPsec settings.
Viewing settings
The following command displays the current IPsec settings:
msh> ipsec
ipp
Use the "ipp" command to view and configure the IPP settings.
Viewing settings
The following command displays the current IPP settings:
msh> ipp
IPP timeout configuration
Specify how many seconds the computer waits before canceling an interrupted print job. The time
can be entered between 30 to 65535 seconds.
msh> ipp timeout [30 - 65535]
IPP user authorization configuration
Use IPP user authorization to restrict users to print with IPP. The default is "off".
2. Remote Maintenance Using telnet
54
To Next Page
Loading...
Need help?
General