• 30 minutes
• 45 minutes
• 60 minutes
Print Compressed Data
Specify whether or not to print compressed data. The supported compression format is GZIP.
Default: [Off]
• On
• Off
Memory Usage
Select memory to be used from Font Priority or Frame Priority.
Default: [Frame Priority]
• Font Priority
Allocates more memory to the PDL work area. Select this setting if printing fails due to insufficient
memory.
• Frame Priority
Allocates more memory for image processing. Select this setting to increase print speed.
Depending on the document you are printing, this setting might not be effective.
Spool Printing
Specify whether or not to complete spooling before starting to print. Spooling stores a sent print job
temporarily in the printer, and then prints it. This function is available only if the hard disk is installed
on the printer.
Default: [Off]
• On
• Off
RAM Disk
If the hard disk is not installed for PDF Direct Print, select a value of 2 MB or higher. This function is
displayed only if no hard disk is installed. For details about the optional SDRAM module, see
Hardware Guide.
Default: [4 MB]
• 0 MB
• 2 MB
• 4 MB
• 8 MB
System Menu
109
To Next Page
Loading...
