Maintenance
Default: [Envelope 3]
• [Envelope 1]
• [Envelope 2]
• [Envelope 3]
• [Envelope 4]
If prints made using the paper tray show heavy smudging, use the
following procedure to change the paper type setting from the control
panel:
• Press the [Menu] key, select [Maintenance], [General Settings],
[Envelope Setting], and then select [Envelope 1], [Envelope 2],
[Envelope 3], or [Envelope 4].
When specifying paper thickness, remember that a higher number
indicates greater thickness. Also, because the paper thickness will
normally be detected automatically, change this setting only if a print
problem occurs.
Duplex printing Not supported
Supported Paper Types
111
To Next Page
Loading...
