Specifying custom size paper for the bypass tray
• The
custom size paper selected using the printer driver overrides that selected using the control panel,
so do not make settings using the control panel if you have already made settings using the printer
driver.
• When [Machine Setting(s)] is selected for [Tray Setting Priority] under [Machine Modes] in [Print
Settings], any settings made using the printer's control panel have priority over any settings made
using the printer driver.
• You cannot print on custom size paper with an application that does not support the custom size
setting.
• For details about the printer driver, see the printer driver Help.
1. Press the [Menu] key.
2. Press the [ ] or [ ] key to select [Paper Input], and then press the [OK] key.
3. Press the [ ] or [ ] key to select [Paper Size:Bypass Tray], and then press the [OK] key.
Loading Paper in Trays
129
To Next Page
Loading...
Need help?
General