• Adjust the printing position.
Adjust the printing position for each tray by specifying the adjustment values for [Registration] in
[Quality
Maintenance] under [Maintenance] using the control panel. For details, see p.165 "Adjusting
Printing Position".
• Adjust the end guide and both side paper guides to match the paper size. See p.117 "Loading Paper
in Trays".
Images are printed at an angle.
• Adjust
the end guide and both side paper guides to match the paper size. See p.117 "Loading Paper
in Trays".
White lines appear.
Toner is almost depleted. When the "Replace print cartridge." message appears on the display, replace
the print cartridge. For details, see p.149 "Replacing the Print Cartridge".
To Next Page
Loading...
Need help?
General