3. Press [Yes] to cancel the print job.
4. Press [No] to return to the previous display.
• If the printer is shared by multiple computers, be careful not to accidentally cancel someone else's
print job.
• Under
Windows, If the printer is connected to the computer using a parallel cable, sent print jobs may
be canceled if the [Job Reset] key is pressed while "Please wait..." is displayed on the control panel.
After the interval set in [I/O Timeout] in [Host Interface] has passed, the next print job can be sent. A
print job sent from a different client computer will not be canceled in this case.
• You cannot stop printing data that has already been processed. For this reason, printing may continue
for a few pages after you press the [Job Reset] key.
• A print job containing a large volume of data may take considerable time to stop.
• To stop data printing, see p.81 "Canceling a Print Job".
Proceeding with Printing Using the Bypass Tray
If you select [Any Size/Type] or [Any Custom Size/Type] for the bypass tray, a warning message will
appear whenever the paper fed from the source tray does not match the size specified in the print job.
When this warning message appears, check the size of the loaded paper and do the following.
1. Load paper of the size/type indicated in the message onto the bypass tray.
2. Press [Continue].
Printing resumes from the page in which the error occurred.
• For details about [Any Size/Type] or [Any Custom Size/Type], see p.39 "Specifying Printer Driver
or Print Command Priority" and p.111 "Print Settings Menu".
2. Printing Documents
62
To Next Page
Loading...
Need help?
General