6. Standard Tray
Prints are delivered here printed side facing down.
7.
Vents
To prevent overheating, heat from internal components is released through these vents. Malfunctions and failure
can result if these vents are blocked or obstructed.
8. Front Cover Release Button
Press this to open the front cover.
9. Power Switch
Press this to turn the printer's power on and off.
10. Friction Pad
This ensures only one sheet of paper is fed in at a time. If multi-sheet feeds occur, clean the friction pad carefully.
1. Guide to the Printer
18
To Next Page
Loading...
