Duplex
Select whether or not to print on both sides of a sheet. If you specify duplex printing, you must
also specify the binding method.
Default: [Off]
• Off
• Long Edge Bind
• Short Edge Bind
Rotate by 180 Degrees
Select whether or not to rotate the print image by 180 degrees.
Default: [Off]
• On
• Off
Blank Page Print
Select whether or not to print blank pages.
Default: [On]
• On
• Off
Edge Smoothing
Select whether or not to smooth the edges of texts and images when printing. When this setting
is enabled, gradation in images may be degraded.
Default: [On]
• On
• Off
Toner Saving
Reduces toner consumption when printing. When this setting is enabled, print quality may be
degraded.
Default: [Off]
• On
• Off
Letterhead Setting
Select whether or not to print on paper that has a fixed print side or print direction (letterhead
paper, for example). For details, see "Printing on Fixed-Orientation Paper", Hardware Guide.
Default: [Auto Detect]
• Off
4. Making Printer Settings Using the Control Panel
112
To Next Page
Loading...
Need help?
General