Tray Switching
You can specify whether or not the printer automatically switches paper trays if paper of the
specified size and type is not loaded in the driver-designated tray.
Default: [Off]
• On
• Off
Extend Auto Tray Switching
This setting enables the printer to switch paper trays automatically, regardless of whether the
tray is manually or automatically selected.
Default: [Off]
• On
• Off
PCL Menu
You can set conditions when using PCL for printing.
Orientation
Select the page orientation.
Default: [Portrait]
• Portrait
• Landscape
Form Lines
Specify the number of lines per page between 5 to 128. The default paper size is used when
the paper size is not specified in the print data.
Default:
(mainly Europe and Asia)
64
(mainly North America)
60
Font Source
Specify the location of the default font.
When you select [RAM], you can select only fonts downloaded to the printer RAM.
When you select [HDD], you can select only fonts downloaded to the hard disk.
When you select [SD Font Download], you can select only fonts downloaded to the SD card.
Default: [Resident]
• Resident
4. Making Printer Settings Using the Control Panel
114
To Next Page
Loading...
