• Do not Prohibit
Simple Encryption
Select whether or not to use apply simple encryption (restrict usage) when enhanced encryption
cannot be used.
Default: [Do not Restrict]
• Restrict
• Do not Restrict
Authenticate Current Job
Select whether or not authentication is required for operations such as canceling jobs. If set to
[Login Privilege], only authorized users or your administrator can operate the printer. If set to
[Access Privilege], users who sent a print job or your administrator can operate the printer.
Default: [Off]
• Login Privilege
• Access Privilege
• Off
Password Policy
Specify the format of passwords: types of characters to be used and minimum length.
Valid characters for passwords are upper-case letters, lower-case letters, decimal numbers, and
symbols such as #. If complexity is set to [Level 1], passwords must use two types of these
characters; if set to [Level 2], three types.
• Complexity Setting
Default: [Do not Restrict]
• Level 2
• Level 1
• Do not Restrict
• Minimum Character No.
If set to 0, minimum length is not specified.
Default: 0
• Between 0 to 32
@Remote Service
Select whether or not to prohibit @Remote Service. If you would like to set to Prohibit, contact
your service representative.
Default: [Do not Prohibit]
• Prohibit
• Do not Prohibit
4. Making Printer Settings Using the Control Panel
124
To Next Page
Loading...
