• If you are using the Type 1 model, this setting appears only when the optional hard disk and the SD
card provided with the hard disk are installed.
1. Press the [Menu] key.
2. Press the [ ] or [ ] key to select [Security Options], and then press the [OK] key.
3. Press the [ ] or [ ] key to select [Extended Security], and then press the [OK] key.
4. Press the [ ] or [ ] key to select [Erase All Memory], and then press the [OK] key.
5. Press the [ ] or [ ] key to select [On], and then press [EraseNo.].
6. Press the [ ] or [ ] key to enter overwrite times, and then press the [OK] key.
7. Press the [ ] or [ ] key to select [On], and then press the [OK] key.
8. Press the [Menu] key.
Security Options Menu
127