7. Close Web Image Monitor.
• To use SmartDeviceMonitor for Admin, you need to download SmartDeviceMonitor for Admin from
the
manufacturer's Website and install it on your computer. Contact your local dealer for information
on downloading SmartDeviceMonitor for Admin.
• To use SmartDeviceMonitor for Admin for encrypting the data for specifying settings, you need to
specify the network administrator's [Encryption Password] setting and [Encryption Key] in [SNMP
Authentication Information] in SmartDeviceMonitor for Admin, in addition to specifying [Permit
SNMPv3 Communication] on the printer. For details about specifying [Encryption Key] in
SmartDeviceMonitor for Admin, see SmartDeviceMonitor for Admin Help.
• If network administrator's [Encryption Password] setting is not specified, the data for transmission may
not be encrypted or sent. For details about specifying the network administrator's [Encryption
Password] setting, see "Registering the Administrator".
Protection Using Encryption
101
To Next Page
Loading...
Need help?
General