1. Enable TCP/IP with the control panel, and then set up the printer's network environment
about TCP/IP including IP addresses.
TCP/IP of the printer is set as default.
2. Install a TCP/IP in Windows to set up the network environment.
Consult the administrator for the local setting information.
3. To print under Windows, install "Printing service for UNIX" or "LPD Print Service" as the
network application.
• For details about setting up IPv4 address, see "Configuration", Hardware Guide.
•
For details about setting the IPv4 address of the printer using DHCP, see "Using DHCP", Software
Guide.
1. Command Configuration
6
To Next Page
Loading...
Need help?
General