Service Call Conditions
D096 3-12 SM Appendix
982 B
Localization error
The localization settings in
the nonvolatile ROM and
RAM are different
(SP5807).
First machine start after the NVRAM is
replaced
Incorrect localization setting
NVRAM defective
The download (program,
print data, language data)
from the IC card does not
execute normally.
Board installed incorrectly
BICU board defective
IC card defective
NVRAM defective
Loss of power during downloading
Important Notes About SC999
Primarily intended for operating in the
download mode, logging is not
performed with SC999.
If the machine loses power while
downloading, or if for some other
reason the download does not end
normally, this could damage the BICU
or the PCB targeted for the download
and prevent subsequent downloading.
If this problem occurs, the damaged
PCB must be replaced.
To Next Page
Loading...
