Ricoh D096 - Page 227

SP Mode Tables
SM Appendix 4-19 D096
Appendix:
SP Mode
Tables
4926 1 Texture Removal (Copy)
[0 to 6 / 1/step]
4927*
Line Width Correction
Adjusts the line width correction algorithm. Positive settings produce thicker
lines; negative settings produce thinner lines. This setting is only applied to
the originals in SP 4921.
4927 1 Line Width Correction (Copy)
[–2 to 2 / 0 / 1/step]
4928*
Independent Dot Erase
Selects the dot erase level. Higher settings provide greater erasure. This
setting is only applied to the originals in SP 4921.
4928 1 Independent Dot Erase (Copy)
[–2 to 2 / 0 / 1/step]
4929*
Positive/Negative
[0 = No, 1 = Yes]
Inverts white and black. This setting is only applied to the originals in SP
4921.
4929 1 Positive/Negative (Copy)
4930*
Sharpness-Edge
[–2 to 2 / 0 / 1/step]
Adjust the clarity. This setting is only applied to the originals in SP 4921.
4930 1 Sharpness-Edge (Copy)
4931*
Sharpness-Solid
[–2 to 2 / 0 / 1/step]
Adjust the clarity. This setting is only applied to the originals in SP 4921.
4931 1 Sharpness-Solid (Copy)