SP Mode Tables
D096 4-30 SM Appendix
7807
Reset–SC/Jam Counters
7807 1
Resets the SC, paper, original, and total jam counters. When the program
ends normally, the message "Completed" is displayed. SP 7807 1 does not
reset the following logs: SP 7507 (Display-Paper Jam History) and SP 7508
(Display-Original Jam History).
7808
Reset–Counters
7808 1
Resets all counters except for the management counters. The management
counters are the counters that are not changed by NVRAM Download (SP
5825 1) When the program ends normally, the message the message
"Completed" is displayed.
7810
Reset–Key Op Code
7810 1
Resets the key operator code. Use SP 7810 1 when the customer has
forgotten the key-operator code. When the program ends normally, the
message "Completed" is displayed, if the program ends abnormally, an error
message is displayed. If the customer forgets the key operator code. To
specify a new key-operator code, use the User Tools: System Settings
Key Operator Tools
Key Operator Code On Enter Key Operator
Code.
7832*
Display-Self-Diag
7832 1
Displays the SC codes and the number of their occurrences. Each number is
in the range of 0 to 9999.
To Next Page
Loading...
