Rigol DHO1000 Series User Manual

The greater the resolution, the longer the gate time. In this way, the measurement
time will be longer.
Select the Measur
ement Item
In the
Measure item, y
ou can select the desired measurement item. Available options
include Frequency, Period, and Totalize. Wherein, Totalize indicates the count of edge
events on the signal.
Clear Count
When "Totalize" is selected as the measurement item, the oscilloscope measures the
count of edge events on the signal. At this time, click or tap
Clear Count to clear the
measur
ement results and start the measurements again.
Statistics Results
Click or tap the
Statistic on/off swit
ch to turn on/off displaying all statistical items.
When enabled, all the statistical results will be displayed in the "Counter" label in the
"Result" bar.
11.2.2 Reset Statistics
Click or tap the "Counter" label in the "Result" bar at the right section of the screen
and a window is displayed. Click or tap Reset Stat. in the window to r
eset the
statistics.
11.2.3 Remove the Measurement
Click or tap the "Counter" label in the "Result" bar at the right section of the screen
and a window is displayed. Click or tap Remove to clear the measurement results. The
"Count
er" label disappears from the "Result" bar accordingly. You can also click or tap
Remove in the counter setting menu to disable the function.
Digital Voltmeter (DVM) and Frequency Counter
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
DHO1000 User Guide
165
www.calcert.com sales@calcert.com1.888.610.7664
0
5
10
15
20
25
30

Rigol DHO1000 Series Specifications

General

Brand	Rigol
Model	DHO1000 Series
Category	Test Equipment
Language	English