4. BASIC OPERATION
IMR02L04-E3
4-21
Continued from the previous page.
Name Symbol Data range
Factory set
value
Manual control mode setting block (
MAN
)
PID memory group number in
Manual control mode
PID.GR
0 to 8
0: Level PID
0
Event memory group number in
Manual control mode
EV.GR
0 to 8
0: Event OFF
1
Editing block (
EDIT
)
Pattern copy *
COPY
Copy source number: 0 to 99
Copy destination number: 0 to 99
Within the maximum pattern number.
0
Data clear *
CLR
All set values in the Parameter setting mode will be
initialized after setting 9999 and switching from NO to
YES.
0
* Settable only in the Reset mode (RESET)
To Next Page
Loading...
Need help?
General
